snapfora
EN
Official-spec proof

Taiwan Passport photo maker

A Taiwan passport photo is 35x45mm (about 413x531px at 300dpi) on a white background. Make the final photo and print sheet locally below.

Taiwan passport photos (known locally as the 2-inch photo) are 35x45mm on a plain white background, head 32-36mm chin to crown so the face fills 70-80% of the frame. Both edges of the face must be visible, no hair over the eyebrows or eyes, neutral expression with mouth closed.

No upload413x531pxWhite
Size illustration · not an application photo

A sizing reference. Review the official application instructions.

Requisitos de la foto

País y tipo de documento

Taiwan · Pasaporte35 × 45 mm · 413 × 531 px

Usa una foto frontal, con luz uniforme y fondo liso. Revisa la lista de comprobación antes de enviar la imagen.

Fuente: 外交部領事事務局 BOCA（護照照片規格） — boca.gov.tw

Spec proof sheet

Taiwan Passport photo specification

Check 2026 rule changes
Size
35 x 45 mm
Pixels (300dpi)
413 x 531 px
Background
White
Head height
32-36 mm

Key requirements

35x45mm, output 413x531px at 300dpi

White background, even, clean and shadow-free

Face the camera, neutral expression, both eyes open

Check facial sharpness and crop margins before export

Print sheet

The tool creates both a single photo and a print sheet. When printing, disable scaling and use 100% actual size.

How the Taiwan passport photo process works

A Taiwan passport photo — locally called the 2-inch photo — is 35×45 mm on a plain white background, with the head measuring 32–36 mm from chin to crown so the face fills 70–80% of the frame. You take the photo to this spec and submit it with your Taiwan passport application to the issuing authority (BOCA). Both edges of the face must be visible, hair must not cover the eyebrows or eyes, and the expression should be neutral with the mouth closed. Snapfora crops and sizes to 35×45 mm locally and flags head height and tilt, so you fix any problem before you submit rather than after a counter rejection. We build to the published BOCA spec but cannot guarantee acceptance — the issuing authority decides.

Printing a Taiwan passport photo locally

For a physical copy, tile the 35×45 mm image onto a 4×6 (6×4) sheet — Snapfora lays out multiple copies with cut lines — and print at a photo kiosk, pharmacy, or local studio. Trim along the lines to get clean 35×45 mm prints. If your application is handled digitally, you can skip the print and upload the JPEG directly.

FAQ

What size is a Taiwan Passport photo?

35x45mm, about 413x531px at 300dpi, on a white background. Taiwan passport photos (known locally as the 2-inch photo) are 35x45mm on a plain white background, head 32-36mm chin to crown so the face fills 70-80% of the frame. Both edges of the face must be visible, no hair over the eyebrows or eyes, neutral expression with mouth closed.

Can I make it at home?

Yes. Upload a front-facing photo and the tool crops it, aligns your face, builds the final image and lays out a print sheet — all locally in your browser, with nothing uploaded.

Is the photo guaranteed to be accepted?

No. Snapfora builds to published specs and gives you a self-check, but acceptance is decided by the issuing authority. Cross-check the official source before submitting.